Security

Security

You can add elements to the server to help to protect the server itself from theft and tampering, and to help to protect the data and programs stored in the server from unauthorized access and use.

Installing a U-Bolt and Security Cable: You can help to deter unauthorized removal of the tower model Netfinity 5000 by installing a U-bolt and security cable on the rear of the server.

Before you begin

•  Obtain the following:
  •  A U-bolt
  •  A flat-blade screwdriver
  •  An adjustable wrench
  •  A 19 mm (3/4 in.) U-bolt or wire rope (similar to National Manufacturing No. 3230, Stock No. 176-735)
  •  Threaded nuts that fit the U-bolt
  •  A security cable
  •  A lock, such as a combination lock or padlock

•  Read 'Safety Information'

1.  Remove the server cover. See 'Option Installation'.
2.  Insert the U-bolt through the holes and secure it in place with the nuts.
3.  If you have completed installing the U-bolt and do not want to install any other internal options, replace the  server cover and reconnect all external cables and power cords (see 'Completing the Installation'  if you need additional information).
4.  Thread the cable through the U-bolt and around an object that is not a part of or permanently secured to  the building structure or foundation, and from which it cannot be removed, then, fasten the cable ends  together with a lock.

Please see the LEGAL  -  Trademark notice.
Feel free - send a   for any BUG on this page found - Thank you.