Adapter Administration


Adapter Administration

This section provides instructions for copying the drive configuration to the ServeRAID adapter or controller, copying the ServeRAID adapter or controller configuration to the drives, initializing the adapter or controller configuration, and scanning for new drives.

Copying the Drive Configuration to the Adapter:

  You can copy the configuration stored on the hard disk
drives to the ServeRAID adapter or controller.

This operation is useful when drives are imported from other systems.

To copy the configuration:

  1. Click on the   icon on the Tool Bar or select
    Adapter Configuration from the Advanced pull-down menu. A screen similar to the following appears.
     
  2.  Select Copy Drive Configuration to Adapter.
  3.  Click on OK.


Copying the Adapter Configuration to the Drives:

  You can copy the configuration stored for the ServeRAID
adapter or controller to all configured hard disk drives.

To copy the configuration:

  1. Click on the   icon on the Tool Bar or select
    Adapter Configuration from the Advanced pull-down  menu. A screen similar to the following appears.
     
  2.  Select Copy Adapter Configuration to Drives.
  3.  Click on OK.

Back to  Jump to TOP-of-PAGE

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.