Tool Bar
Descriptions of the quick-path icons provided on the Tool Bar are as follows:
Save the Configuration Event Log: This icon
appears in the Information mode. When you
select this icon, a pop-up window appears and
lets you specify a file name and path for the
ServeRAID Configuration Event Log.
NOTE:
This feature currently is not supported on
IBM Netfinity 3000, 3500, 5000, and 5500
servers, however, IBM intends to support
this feature on these server models in the
near future. The updated BIOS code
needed to support this feature will be
made available on the World Wide Web.
(See 'Obtaining ServeRAID Updates' for
the instructions needed to access the IBM support page.)
Configure the ServeRAID Controller: This
icon appears in the Information mode. When
you select this icon, the configuration program
switches from the Information mode to the
Configuration mode. A message will appear at
the bottom of the Main Panel if no Ready drives
are available for the selected ServeRAID
controller. If this occurs, you can click on the
Cancel button to return to the Information mode
or select another ServeRAID controller.
Configure for Clustering: This icon appears
in the Information mode. You can select this
icon to define the ServeRAID controller for use
in a dual-node, high-availability, shared-disk
cluster environment. Detailed instructions for
using the clustering features are provided in the
IBM Netfinity High-Availability Cluster Solution
Installation and User's Guide.
You can obtain a copy of this manual at the following address on
the World Wide Web:
http://www.pc.ibm.com/netfinity/clustering
Scan for New or Removed Ready Drives:
This icon appears in the Information mode.
When you select a ServeRAID controller from
the Main Tree and click on this icon, the
configuration program will scan the individual
channel, or all channels, on the controller for
new or removed Ready drives. Use this feature
whenever you physically change the
configuration of your ServeRAID subsystem, for
example, when you physically install or remove
one or more SCSI drives.
Create an Array: This icon appears in the
Information mode if you select a controller from
the Main Tree and that controller has Ready
drives available.
Help: This icon appears in both the
Information and Configuration modes. Select
this icon to access the online ServeRAID Help
facility. Task-oriented Help is available from
many of the pop-up windows that appear during
the configuration process, and, you also can
obtain context-sensitive Help by selecting an
item and then pressing the F1 key.
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.