Starting the Configuration Program
The ServeRAID Configuration Program runs in two
modes: the Configuration mode and the Information mode .
In the Configuration mode, you can create or delete disk
arrays, create or delete logical drives, and define your
hot-spare drives. When this mode is active, only a limited
set of functions is available from the Menu and Tool Bars.
See 'Configuration Mode' for more information.
In the Information mode, you can view the existing device
and configuration information for your ServeRAID
subsystem. When this mode is active, you can use the
functions available from the Menu and Tool Bars to
customize settings for your ServeRAID controllers. See
'Information Mode' for more information.
The ServeRAID Configuration Program is provided on the
IBM ServeRAID Configuration CD packaged with the
ServeRAID adapter, and it also is provided on the
ServerGuide CD (CD 1) that comes with some IBM server models.
Notes:
To start the configuration program:
One of the following screens will appear:
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.