Testing the RAID Subsystem

Testing the RAID Subsystem

You can use the RAID Subsystem Diagnostic program to test the ServeRAID controller and the devices connected to the controller.

To test the RAID subsystem:

  1.  Start the ServeRAID Configuration program (see 'Starting the ServeRAID Configuration Program').
  2.  Select Advanced Functions from the Main Menu,  then, press Enter.
  3.  Select IBM RAID Subsystem Diagnostic from the  next menu, then, press Enter.
  4.  Select the diagnostic test that you want to run, then,  press Enter.

     Descriptions of the diagnostic tests available are as  follows:

  5.  Follow the instructions that appear on the screen.

Back to  Jump to TOP-of-PAGE

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.