Restoring the Disk-Array Configuration


Restoring the Disk-Array Configuration

To restore the disk-array configuration information for the ServeRAID controller, use the &raiddk. and an up-to-date disk-array configuration backup diskette.
  Dynamic changes in the configuration of the disk arrays occur due to hot-spare drive replacement or other drive maintenance activity. Because of this, the configuration backup information on the diskette might be different from the information stored in NVRAM for the ServeRAID controller. Therefore, it is important that you back up the disk-array configuration information frequently, to keep the backup information on the diskette current.


To restore the ServeRAID configuration information:

  1.  Start the ServeRAID Configuration program (see 'Starting the ServeRAID Configuration Program').
  2.  Select Advanced Functions from the Main Menu,  then, press Enter.
  3.  Select Restore/Convert Saved Configuration from  the next menu, then, press Enter.
  4.  Insert the Disk-Array Configuration Backup diskette  into the diskette drive, then, press Enter.
  5.  A list of backup file names appears. Use the Up  Arrow (  ) or Down Arrow (  ) key to select the file  name that you want to restore, then, press Enter.
  6.  The Confirm pop-up window appears.
     Select Yes to restore the configuration information, or  select No to return to the previous menu, then, press Enter.
  7.  Press Esc to return to the Main Menu.

Back to  Jump to TOP-of-PAGE

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.