Specifications

Specifications

The following list contains the specifications for the Netfinity 5500.

Size (Tower Model)

Depth: 700 mm (27.6 in.)
Height with NetBAY3: 530 mm (20.9 in.)
Height without NetBAY3: 356 mm (14 in.)
Width: 483 mm (19 in.)
Front clearance: 305 mm (12 in.)
Rear clearance: 100 mm (4 in.)
Side clearance: 50 mm (2 in.)

Size (Rack Model)

Depth: 650 mm (25.6 in.)
Height: 356 mm (14 in.) (8 U)
Width: 440 mm (17.3 in.)

Weight

Unpacked, minimum configuration (with empty NetBAY3): 39 kg (85 lb.)
Unpacked, maximum configuration: 55 kg (120 lb.)

Heat Output

Approximate heat output in British thermal units (Btu) per hour:
- Minimum configuration: 1023.9 Btu
- Maximum configuration: 2764.6 Btu

Environment

Air temperature
- System on: 10° to 35° C (50° to 95° F)
  Altitude: 0 to 914 m (3000 ft.)
- System on: 10° to 32° C (50° to 89.6° F)
  Altitude: 914 m (3000 ft.) to 2133 m (7000 ft.)
- System off: 10° to 43° C (50° to 110° F)
  Maximum altitude: 2133 m (7000 ft.)
Humidity
- System on: 8% to 80%, maximum wetbulb, 23° C (73.4° F)
- System off: 8% to 80%, maximum wetbulb, 27° C (80.6° F)
Altitude: 0 to 2133 m (0 to 7000 ft.)

Acoustical Noise Emissions Values

Sound power, idling
- 6.2 bel for open bay system (no hard disk drives installed)
- 6.2 bel for typical system configuration (3 hard disk drives installed)
Sound power, operating
- 6.2 bel for open bay system (no hard disk drives installed)
- 6.4 bel for typical system configuration (3 hard disk drives installed)
Sound pressure, idling
- 45 dBA for open bay system (no hard disk drives installed)
- 45 dBA for typical system configuration (3 hard disk drives installed)
Sound pressure, operating
- 45 dBA for open bay system (no hard disk drives installed)
- 46 dBA for typical system configuration (3 hard disk drives installed)

These levels are measured in controlled acoustical environments according to ISO 7779, and are reported in accordance with ISO 9296. The declared sound power levels indicate an upper limit, below which a large portion of machines operate. Sound pressure levels in the location might exceed the average values stated because of room reflections and other nearby noise.

Electrical Input

Sine-wave input (50 or 60 Hz) is required
Input voltage
- Low range
  - Minimum: 90 V ac
  - Maximum: 137 V ac
- High range
  - Minimum: 180 V ac
  - Maximum: 265 V ac
- Input kilovolt-amperes (KVA) approximately
  - Minimum configuration as shipped: 0.2 KVA
  - Maximum configuration: 0.78 KVA

Electrostatic Discharge

Tested to 14 KV

Immunity

Verified to comply with EN 50082-2

Safety Standards

UL 1950
CSA C22.2 No. 950-M93
EN 60950 and countries deviations
IEC 950
NOM-019

Back to

Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.