Netfinity System Management Processor
See > TIP H166850
The following information is about the system management
processor that is integrated in the server. It also describes
how to access the system management processor without
Netfinity Manager. The following information is for the
Netfinity System Management Processor.
One of the features of the Netfinity 5500 is the integrated
system management processor.
Note:
To use all of the functions of the system management
processor, you must install the Advanced System
Management service for Netfinity Manager.
You also will need a user-provided modem attached to serial
port A Management Port C to use the remote functions.
Refer to 'Serial Ports' for information about serial port A.
The Advanced System Management service gives you the
ability to configure and monitor many features of the
server's system management processor.
You can connect to, and directly access and control, the system
management processor of a remote system. With the
Advanced System Management service you can configure
Advanced System Management service events (such as,
POST, loader, and operating-system timeouts, and critical
temperature and voltage failures).
If any of these events
occur, the Advanced System Management service can be
configured to automatically forward a Netfinity alert in one
of three ways:
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.