Diagnostic Tools
The following tools are available to help identify and
resolve hardware-related problems:
Diagnostic Programs
See Running Diagnostic Programs
The server diagnostic programs are stored in upgradable
read-only memory (ROM) on the system board. These
programs are the primary method of testing the major
components of the server: the system board, Ethernet
controller, video controller, RAM, keyboard, mouse
(pointing device), diskette drive, serial port, and parallel
port. You can also use them to test some external devices.
Also, if you cannot determine whether a problem is caused
by the hardware or by the software, you can run the
diagnostic programs to confirm that the hardware is working properly.
Note: When you run the diagnostic programs, a single
problem might cause several error messages. When this occurs, work to
correct the cause of the first error message. After the cause of the
first error message is corrected, the other error messages might not
occur the next time you run the test.
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.