Selecting a SCSI Device (Adaptec)

Selecting a SCSI Device Adaptec

After you select the mode you want to run, a window displays the following information about the SCSI devices.

SCSI ID
LUN
Vendor name
Product name
Revision level
Capacity
SCSI device type

Use the Up/Down (

) keys to select the device you want to test, then, press Enter. After you select a device, the test menu for the test mode you selected is displayed. See 'Selecting a Test (Advanced Mode)' and 'Selecting a Test (Standard Mode)'.

Manually Selecting a SCSI Device:

If the test fails to find a installed device, the device might be defective. To manually select the device, do the following:

Press F5 to access the User Selection Menu.
Highlight the correct device (option), then, press Enter
Enter the SCSI ID and LUN of the device. After you select a device, the test menu for the test mode you selected is displayed. See 'Selecting a Test (Advanced Mode)' and 'Selecting a Test (Standard Mode)'.

Back to

Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.