Power Supplies / 3518
Power Supplies (Type 3518)
Always unplug the power cord and
wait two minutes before replacing the power supply to give the power supply
capacitors time to discharge.
The expansion tower is shipped with a primary power supply.
An additional or optional power supply can be added to the computer.
Connectors are used to transfer the primary power supply voltages and
signals from the primary power supply to the optional power supply.
The following illustrations show how the two power supplies
When replacing the primary power supply cover plate, rotate the
plate 180°. (This will leave an opening for the primary power
supply connector cable that connects to the optional power supply.)
Failure to do so will cause the power supply connector cable
lo be crimped when the plate is replaced.
Tabs are located on the side of each power supply to secure them
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.