Changing the Status Flag Attributes (9306-900)

•  Appearance on the screen: none, timed or constant
•  Position on the screen
•  Color and opaqueness

1.  Press the Print Screen key
2.  Press the F2 key to display the Advanced Menu screen.  Press the Right Arrow (>) key to move the highlighting to the Setup menu.
3.  Using the Up Arrow (  ) and Down Arrow (  ) keys, move the highlight to Flag and press the Enter key. The following menu appears.

         +-------------------------------
         |
         |  Flag Attributes
         |  Enabled         Names On
         |  Row             14
         |  Column          1
         |  Color           2
         |  Text            0
         |  Mode            Transparent
         |
    

4.  Highlight the setting to be changed and use the + and -  keys to adjust the values. The following table describes each of the  available menu attributes:

   Setting	Values and Effect on Flag Appearance
   Enabled	Flags Off = Flag does not appear
   	Ports On = Flag shows the connected port number
   	Names On = Flag shows the connected server name
   	Ports Timed = Port number displays for five seconds after connection
   	Names Timed = Name displays for five seconds after connection.
   Row	Select value from 0-14 to position the flag vertically on the screen
   Column	Select values from 0-25 to position the flag horizontally on the screen
   Color	Select values from 0-7 for the flag color
   Text	Select values from 0-7 for the flag text color
   Mode	Choose between Opaque and Transparent

5.  Press the Enter key to save the settings. Press Esc at anytime before pressing Enter to  cancel the operation and save the previous settings.
6.  Press Esc, to exit.

Please see the LEGAL  -  Trademark notice.
Feel free - send a   for any BUG on this page found - Thank you.