Removal, Server Selector Unit (9306)



Removal, Server Selector Unit

The server selector unit is located in the upper rear of the rack cabinet. The server selector unit can only be accessed or removed from the rear of the PC Server Rack cabinet.
  Caution: The server selector unit is heavy. You will need two people to safely remove the server selector unit.

To remove the server selector unit:
  1.  Power-off the rack.
  2.  Unplug the keyboard, mouse, video cables, and the power cord.
  3.  Remove the server selector console.
  4.  With one person bracing the server selector unit from below,  have the second person use a 5/16-inch wrench to remove the four  nuts that secure the server selector unit to the rack cabinet.
  5.  Remove the server selector unit from the cabinet.


Note: When replacing the server selector unit, be sure that the Server Selector cable is fed through the indentation along the left side of the server selector unit.

Server Selector Unit Removal


 

Back to  Jump to TOP-of-PAGE

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.