Advanced Systems Management Adapter Battery (Netfinity 7000 - 8651)


Advanced Systems Management Adapter Battery

  The lithium battery on the Advanced Systems Management Adapter must be handled correctly to avoid possible danger.

It you replace the battery, you must adhere to the following instructions and the requirements in the 'Battery Notice Lithium (see below)'.

When replacing the battery, use only FRU 33F8354 or an equivalent type lithium battery recommended by the manufacturer of the battery currently installed in the server. Dispose of the battery as required by local ordinances or regulations and the manufacturer's instructions.

  1.  Power-off the server and peripheral devices and  disconnect all external cables and power cords, then  remove the top cover (see 'Cover (Top)').
  2.  Locate the battery on the Advanced Systems  Management Adapter.

    NOTE: The Advanced Systems Management Adapter is  installed in EISA slot 1.

      Caution This product contains a lithium battery. The
     lithium battery presents a fire, explosion, or  severe burn risk if handled incorrectly.  When replacing the battery, use only IBM FRU  Number 33F8354 or an equivalent type lithium  battery recommended by the manufacturer of the  battery currently installed in your server. Dispose  of the battery as required by local ordinances or  regulations and the manufacturer's instructions.

    1.  To remove the disc battery, push the battery  from the edge toward the center, then lift the  battery out of the battery socket.
    2.  To insert the new battery, tilt the battery into the  battery socket and press in and down on the  battery. Be sure the battery is secure in the  battery socket.

Back to  Jump to TOP-of-PAGE

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.