Processor Card - Jumper (Netfinity 7000 - 8651)
Processor Card - Jumper
SCAN Jumpers A-SCAN J6B1 / B-SCAN J6D1
NOTE: The default settings for the scan jumpers is skip.
These settings do not affect the normal operation and there is no need to change them.
Jumper |
Loc |
Pin 1-2 |
Pin 2-3 |
SCAN-J6B1 |
A |
INCLUDE |
SKIP |
SCAN-J6D1 |
B |
INCLUDE |
SKIP |
Fan Sink Connectors C-J8A1 & J8A2 / D-J8C1 & J8C2. / E-J9B1
Connector |
Loc |
Pin 1 |
Pin 2 |
Pin 3 |
J8A1 & J8A2 |
C |
Ground |
Fan Fail |
+5V |
J8C1 & J8C2 |
D |
Ground |
Fan Fail |
+5V |
J9B1 |
E |
MBFANFAIL |
PRc1_PRC2 |
FailK2 |
Active/Passive Jumper F-Passive/Active J4B1
NOTE: The default setting for the active/passive jumper is
passive and should not be changed.
Jumper |
Loc |
Pin 1-2 |
Pin 2-3 |
Passive/Active J4B1 |
F |
Passive |
Active |
Processor Speed Jumper G-J4D1
Processor Speed |
SEL0 |
SEL1 |
SEL2 |
Park0 |
Park1 |
Park2 |
200/66 MHz |
Jumper |
- |
Jumper |
Jumper |
- |
- |
L2 Cache Jumper H-J1C1
NOTE: 512 KB jumper setting = 1 and 2, 3 and 4
1 MB jumper setting = 5 and 6, 7 and 8
Fan Fail Harness Connectors J-J1A1
Connector |
Loc |
Pin 1 |
Pin 2 |
Pin 3 |
J1A1 |
J |
- |
PRc1_PRC2 |
FailK1 |
Back to
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.