Resolving Software Configuration Conflicts (Netfinity 7000

Resolving Software Configuration Conflicts (Netfinity 7000 - 8651)

Resolving Software Configuration Conflicts

Hardware Configuration Conflicts

The memory-address space and IROs used by some hardware options might conflict with addresses defined for use through application programs.

It there is a conflict, one or more of the following conditions might exist:

The system cannot load the operating system.
The system does not work.
An application program does not operate, or it returns an error.
Screen messages indicate that a conflict exists.

You can resolve conflicts by changing either the software or the hardware configuration.

NOTE:

A corrupt CMOS can cause the operating system to crash after the operating system boots. (See 'Printing and Restoring CMOS Default Settings')
Use the Change Configuration Settings selection in the System Configuration Utility program to view the addresses used by the system-board functions and adapters. (See 'Step 3: Change Configuration Settings').

If a device driver is causing a memory-address conflict, refer to the operating-system documentation or the documentation supplied with the device drivers.

Back to

Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.