Hardware Configuration Conflicts (Netfinity 7000 - 8651)
Hardware Configuration Conflicts
Use the following information to help resolve hardware configuration conflicts:
- Run the System Configuration Utility program to view
and change the resources that are used by the
system board functions. Record the current settings
before making any changes.
- Determine which adapter or device is causing the
error. Use the Change Configuration Settings
selection in the System Configuration Utility program
to update system configuration information (.CFG)
files. (See 'Step 3: Change Configuration Settings' for instructions.)
- Change configuration resource allocations. Use the
Change Configuration Settings selection in the
System Configuration Utility program to view or
change system-board resource allocations. (See
'Step 3: Change Configuration Settings' for instructions.)
- Change adapter jumpers or switches. Jumpers and
switches define the system resources that a device
can use. If the settings are incorrect or set to use a
resource that cannot be shared, a conflict occurs and
the device remains deactivated. Use the
Switch/Jumper Settings selection in the System
Configuration Utility program to verity switches (see
'Step 5: View Switch/Jumper Settings').
Read the documentation that comes with the device.
- Change system (planar) board jumpers or switches.
- Remove the device or adapter. Some configurations
are not supported (for example, you cannot operate
the server with two ISA SVGA adapters installed).
Back to 
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.