Ultra SCSI Connection The SCSI cable is connected to the
internal SCSI controlloer. Default state is inactive.
Parallel Connector A signal cable for a parallel device,
such as a printer, connects here.
Serial Connectors Signal cables for modems or other
serial devices connect here to the two 9-pin serial connectors, port A and
port B. Serial port B shares a port assignment.
See Devices and I/O Ports for port assignment information.
Monitor Connector The monitor signal cable connects here.
Universal Serial Bus (USB) Connectors You can connect I/O devices
to the Universal Serial Bus (USB) connectors. USB connector A and connector B.
You need a 4-pin cable to connect a device to these ports.
Keyboard Connector The keyboard cable connects here.
Mouse Connector The mouse cable connects here. (Sometimes
called the auxiliary-device port.)
Ethernet Connectors There are two Ethernet connectors: A
DB-15 and an RJ-45. The DB-15 attachment unit interface (AUI) connector is
for attachment of external 10BASE2, 10BASE5, or 10BASE-F medium attachment
unit (MAU). The RJ-45 connector is for attachment to the integrated
10BASE-T (twisted-pair) transceiver. If the server was shipped with an
Ethernet interface cable, you must attach it to the RJ-45 connector on the
server, and the cable on the 10BASE-T device.
For more information about cables, see Ethernet Controller Messages
Power Connector The server power cable connects here.
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.