Serial Connectors The server has two 9-pin, universal asynchronous
receiver /transmitter (UART) serial connectors (A and B).
Serial signal cables for modems or other serial devices attach
here. To attach 25-pin signal cables, you must use a 9-pin-to-25 pin
adapter cable. For information about displaying and changing port
assignments, see 'Devices and I/O Ports'.
SVGA Connector The monitor signal cable attaches here.
If the server has an adapter other than the one shown here,
refer to the instructions that come with the adapter or monitor.
External SCSI Connector External SCSI devices attach here.
Ethernet Connector The cable for the Ethernet network attaches here.
Parallel Connector The server has one 25-pin parallel port.
A signal cable for a parallel device, such as a printer, attaches
here. For information about displaying and changing port assignments,
see 'Devices and I/O Ports'.
Universal Serial Bus
You can use a 4-pin USB cable to attach i/O devices to the
USB connector.
Mouse Connector The mouse (auxiliary-device) cable attaches here.
Keyboard Connector The keyboard cable attaches here.
Infrared Connector An optional infrared (IR) transceiver
module can attach here.
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.