Starting the EISA Configuration Diskette
Starting the EISA Configuration Diskette
NOTE:
Use a backup copy of the EISA Configuration Diskette.
(see 'Backing Up the EISA Configuration Diskette').
To start the EISA Configuration Diskette:
- Insert the backup copy of the EISA Configuration Diskette into the
diskette drive.
- Power-on the computer, or if it is already on,
shut down the operating system and restart the computer.
- When the first screen appears, press Y and then,
press Enter.
Follow the instructions on the screen until the
Steps in configuring the computer menu appears.
- Use the Up Arrow (
) or Down
Arrow ( 
) keys to advance through the items
on the screen. Use the Tab key to select choices
on the bottom of the screen Press the Esc key to
return to a previous menu.
- Press Enter to make a selection.
- Follow the instructions on the screen to view or change (edit)
the configuration information.
NOTE:
Adapters installed in the server
appear automatically on the EISA Configuration screens
after you copy
the adapter's configuration file (file with an
extension of .CFG ) to the
EISA Configuration Diskette.
If you want to manually add an
adapter that you have not yet installed in the server,
add it using
Step 2 from the menu.
To configure ISA adapters, follow the instructions on the screen.
Back to 
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.