PC Doctor System Diagnostic
Running the Diagnostics - TP 390E - 2626
PC Doctor for DOS is used to perform diagnostics on the ThinkPad 390E
Note: Some test items require tools as shown below:
- FDD: Erasable 2HD diskette
- Parallel: Wrap plug (P/N 72X8546)
- Serial: Wrap plug (P/N 72X8546)
- PCMCIA: PC test card (P/N 35G4703)
- CD-ROM: Any data and audio CDs
- ThinkPad 390E PC Doctor for DOS Diskettes 1 and 2 (available from the website)
- ThinkPad 390E CE Utility Diskette (available from the website)
To run PC Doctor:
- Shutdown the computer.
- Insert the PC Doctor for DOS diskette #1 into the diskette drive.
- Turn on the computer.
- Select the correct model name and test type:
- Option 1: TP-390E without audio
- Option 2: TP-390E with audio
and press Enter
- When prompted, remove the diskette from the diskette drive, then insert
the PC Doctor for DOS diskette #2 into the diskette drive and press any key.
The PC Doctor for DOS diagnostics program screen appears.
To use PC Doctor:
- Press the left and right arrow keys to move around the main menu.
Press Enter to enable the highlighted option. The main options are:
- Diagnostics
- Interactive Tests
- Hardware Info
- Utility
- Quit
- Press the up and down arrow keys to move in a selected menu.
Press Enter to enable the highlighted option.
Note: You can press F1 for help.
The Diagnostics and Interactive Tests menus contain test items you perform on the computer.
After performing a test, press F3 to view the test result log for detailed information.
See PC Doctor Diagnostics Error Codes and Messages
Back to 
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.