PCMCIA Slots


PCMCIA Slots



To remove the PCMCIA slots:
  1.  Remove the three screws securing the PCMCIA slot board.
     

    Step Size (Quantity) Head & Color Torque
    1 M2 x 18L (3) Pan head, black 2.0 kgf-cm

      Note: Make sure you use the correct screw for replacement.  

  2.  Use a flat-bladed screwdriver to disconnect the  PCMCIA card from the connector.
     
  3.  Carefully remove the PCMCIA card.

 


  CAUTION When reassebmling this section of the machine, the upper heatsink must be reassembled first before the PCMCIA slots.

Back to  Jump to TOP-of-PAGE

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.