Memory Checkout

Memory Checkout

DIMM are available for increasing memory capacity.

Slot 1 (MB) Slot 2 (MB) Total Memory (MB) 32 0 32 0 32 32 32 32 64 64 0 64 0 64 64 64 32 96 32 64 96 64 64 128 128 0 128 0 128 128 128 32 160 32 128 160 128 64 192 64 128 192 128 128 256

Slot 1 (MB)	Slot 2 (MB)	Total Memory (MB)
32	0	32
0	32	32
32	32	64
64	0	64
0	64	64
64	32	96
32	64	96
64	64	128
128	0	128
0	128	128
128	32	160
32	128	160
128	64	192
64	128	192
128	128	256

Memory errors might stop system operation, show error messages on the screen, or hang the system.
Use the following procedure to isolate memory problems:

For TP 390E - (2626)

Boot from and start PC Doctor. (See 'PC Doctor System Diagnostics' for details.)
Select Memory Test - Full and/or Memory Test - Quick.
Follow the instructions in the message window.

For TP 390/i Series 1700 - (2626, 2627)

Boot from the diagnostics diskette and start the PQA program (please refer to 'PQA System Diagnostics').
Go to Memory in the test items.
Press F2 in the test items.
Follow the instructions in the message window.

Note: Make sure that the DIMM is properly installed into the connector.
A loose connection can cause an error.

Back to

Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.

Slot 1 (MB)	Slot 2 (MB)	Total Memory (MB)
32	0	32
0	32	32
32	32	64
64	0	64
0	64	64
64	32	96
32	64	96
64	64	128
128	0	128
0	128	128
128	32	160
32	128	160
128	64	192
64	128	192
128	128	256

Slot 1 (MB)	Slot 2 (MB)	Total Memory (MB)
32	0	32
0	32	32
32	32	64
64	0	64
0	64	64
64	32	96
32	64	96
64	64	128
128	0	128
0	128	128
128	32	160
32	128	160
128	64	192
64	128	192
128	128	256

Slot 1 (MB)	Slot 2 (MB)	Total Memory (MB)
32	0	32
0	32	32
32	32	64
64	0	64
0	64	64
64	32	96
32	64	96
64	64	128
128	0	128
0	128	128
128	32	160
32	128	160
128	64	192
64	128	192
128	128	256