PCMCIA Slots (TP 240 - 2609)


PCMCIA Slots



  -Warning- Special care must be taken when disconnecting the PCMCIA card not to cause a short or damage the connector.

To remove the PCMCIA slots:
  1.  Remove the screw securing the PCMCIA slot board.
     
  2.  Use a flat-bladed screwdriver to disconnect the PCMCIA card from the connector.
  3.  Carefully remove the PCMCIA card.

Step Size (Quantity) Head & Color Torque
1 M2.0 x 7 (1) Flat head, silver 2.0 kgf-cm


Note: Make sure you use the correct screw for replacement.

Back to  Jump to TOP-of-PAGE

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.