LCD Misc. Parts
Please see the LEGAL - Trademark notice.
Step
Size (Quantity)
Torque
1
(a) M2.5 x 6mm, nylon-coated (2)
(b) M2.5 x 6mm, special-head (1)3-4 kgcm
3-3.5 kgcm
2
M2.5 x 6mm, nylon-coated (2)
3-4 kgcm
NOTE: Make sure you use the correct screw, and tighten all
screws firmly to the torque shown in the table, if you have a torque screwdriver.
Never use a screw that you removed.
Use a new one. Make sure the screws are tightened firmly.
When replacing - the hinge covers removed in step -5-, attach them to the shield
sheet with double-sided adhesive tape as the old ones had been attached.
TFT LCD.
1 2 3: Hinges
4 5: Latches
Step
Size (Quantity)
Torque
1
(a) M2.5 x 6mm, nylon-coated (2)
(b) M2.5 x 6mm, special-head (1)3-4 kgcm
3-3.5 kgcm
2
M2.5 x 6mm, nylon-coated (2)
3-4 kgcm
NOTE: Make sure you use the correct screw, and tighten all
screws firmly to the torque shown in the table, if you have a torque screwdriver.
Never use a screw that you removed.
Use a new one. Make sure the screws are tightened firmly.
When replacing - the hinge covers removed in step -5-, attach them to the shield
sheet with double-sided adhesive tape as the old ones had been attached.
When replacing - Replace the LCD miscellaneous parts as follows:
Back to
Feel free - send a for any BUG on this page found - Thank you.