Keyboard Unit (TP 380XD, 385XD, 380Z - 2635)


Keyboard Unit



 

Step Size (Quantity) Torque
1 M2.5 x 25mm, nylon-coated (1) 3-4 kgcm
2 (a) M2.5 x 8mm, nylon-coated (3)
(b) M2.5 x 6mm, nylon-coated (1)
3-4 kgcm


NOTE: Make sure you use the correct screw, and tighten all screws firmly to the torque shown in the table, if you have a torque screwdriver. Never use a screw that you removed.
Use a new one. Make sure the screws are tightened firmly
.


-3- Make sure that the battery pack lock is not sticking out, and turn the computer right side up.


 

NOTE: In order not to damage the connectors, pull the keyboard assembly toward you a little in step -5- and then go to -6-.


 


 

When installing - See the following figure for the direction of the speaker connector.


 

When replacing - Stick a model name label on the keyboard.


Back to  Jump to TOP-of-PAGE

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.