1170 DSP Card or ESS Card (765D-9546 765L-9547)

1170 DSP Card or ESS Card


Step Size (quantity) Memo (torque)
1 M2.5x4 (1) Nylon coating (4kgcm)

NOTE: Do not reuse (see Screw Kit - FRU P/N) a screw you removed. Use a new screw and tighten the screw to the torque specification shown.

When replacing:

  1.  The following figure shows the microphone cable path.
  2.  When replacing the DSP card, make sure that the connector on the  card is not connect properly, no sound will be produced.

Back to  Jump to TOP-of-PAGE

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.