1080 System Board Assembly (2635-380/385)

1080 System Board Assembly

  1.  The system unit serial number must be restored when the system board is replaced.  To restore the system unit serial number, select the option Set system identification on the maintenance diskette.  The flash ROM on the system board contains the vital product data (VPD) - that is, the system unit serial number, system board system number,  and other computer-unique data.
  2.  Do not power off the computer when restoring the VPD. The system unit serial number label is attached to the base cover.
  3.  Before removing and replacing the system board assembly, make sure that the PCMCIA cards are removed and the eject levers  are not sticking out.


NOTE: As the PCMCIA eject buttons are sticking out, pull the buttons out slightly and fold them to the right, then push up the system board assembly from the bottom when removing the system board assembly.


Step Location (Quantity) Length
4 System Board Assembly (2) M2.5 x 6mm
5 Base Cover (1) Special screw

Back to  Jump to TOP-of-PAGE

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.