1160 System Board and PCMCIA Slot Assembly (9546, 9547)
1160 System Board and PCMCIA Slot Assembly
NOTE:
The system unit serial number must be restored when
the system board is replaced.
To restore the system unit serial number, select the
option Set system
identification on the maintenance diskette.
The EEPROM on the system board contains the vital
product data (VPD): the system unit serial number,
system board system number, and other computer-unique data.
Do not power off the computer when restoring the VPD.
The system unit serial number label is attached to the base cover.
Before removing and replacing the system board, make sure that the
PCMCIA cards are removed and the eject levers are not sticking out.
Do not pull the PCMCIA slot assembly while removing the system board.
When handling the PCMCIA slot assembly,
be careful not to disassemble any part of it.
The slot assembly is not solidly fixed when it is removed from the
system board or the FRU.
Be sure to unlock both ends of the PCMCIA connector
before removing the PCMCIA slot assembly from
the system board (2).
Back to 
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.