Lift the LCD front cover, then remove the microphone cable.
Please see the LEGAL - Trademark notice.
Step
Length (Quantity)
Memo
2
M2.5 x 9 mm (2)
3
M2.5 x 6 mm (2)
NOTE:
Make sure you use the correct screw when replacing.
NOTE: When replacing
Position the microphone cable as shown.
1107B LCD Panel
NOTE:
Be careful not to scratch or soil the surface of
the LCD panel when replacing it.
Lift the LCD panel and disconnect the connector for the
interface cable. If there is the kapton tape on the rear of the
panel, remove it.
Step
Length (Quantity)
Memo
1
M2.5 x 6 mm (2)
NOTE:
Make sure you use the correct screw when replacing.
1107C Interface Cable Assembly, Hinges
1 When replacing the interface cable assembly
2, 3 When replacing the hinges
Remove the kapton tape in step 1
Step
Length (Quantity)
Memo
2
M2 x 4.3 mm (4)
A loose or incorrect connection of the
connector can cause a serious problem.
Back to
Feel free - send a for any BUG on this page found - Thank you.