Lift the LCD front cover, then remove the microphone cable.
Please see the LEGAL - Trademark notice.
Step
Length (Quantity)
Memo
2
M2.5 x 9 mm (2)
3
M2.5 x 6 mm (2)
NOTE:
Make sure you use the correct screw when replacing.
NOTE: When replacing
Position the microphone cable as shown.
1106B LCD Panel
NOTE:
Be careful not to scratch or soil the surface of
the LCD panel when replacing it.
Step
Length (Quantity)
Memo
1
M2.5 x 6 mm (2)
NOTE:
Make sure you use the correct screw when replacing.
Lift the LCD panel a bit, then disconnect the interface cable
connector.
A loose or incorrect connection of the
connector can cause a serious problem.
1106C Interface Cable Assembly, Hinges
1 When replacing the interface cable assembly
2, 3 When replacing the hinges
Remove the kapton tape in step 1.
Step
Length (Quantity)
Memo
2
M2.5 x 4 mm (2)
NOTE:
Make sure you use the correct screw when replacing.
When replacing When replacing
Replace the kapton tape as shown below.
Back to
Feel free - send a for any BUG on this page found - Thank you.