LCD Unit, 12.1 SVGA (ASM P/N's 29H9226, 29H9029)

LCD Unit, 12.1 SVGA (ASM P/N's 29H9226, 29H9029)

1101A LCD Cover

NOTE: Be careful not to scratch the LCD cover when removing the screw covers 1
The LCD cover has several latches. Release these latches; then remove the LCD cover. Be careful not to break the latches.

Step Length (Quantity) Memo 2 M2.5 x 8 mm (4) 3 M2 x 4.3 mm (6) Flat head

Step	Length (Quantity)	Memo
2	M2.5 x 8 mm (4)
3	M2 x 4.3 mm (6)	Flat head

NOTE: Make sure you use the correct screw when replacing.

1101B LCD Panel, Interface Cable Assembly

LCD Cover (1101A)

NOTE: Be careful not to scratch or soil the surface of the LCD panel when replacing it.

The LCD panel is latched to the rear cover. Remove the LCD panel by bending the rear cover in step 6

Too much force will break the rear cover.

1101C Hinges

LCD Cover (1101A)
LCD Panel (1101B) (with interface cable assembly)

Step Length (Quantity) Memo 1 M2 x 4.3 mm (4)

Step	Length (Quantity)	Memo
1	M2 x 4.3 mm (4)

NOTE: Make sure you use the correct screw when replacing.

Back to

Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.