Memory Checkout (9546, 9547)



Memory Checkout

DIMM cards are available for increasing memory capacity.

Models 760C/760CD/760L/760LD

DIMM Displayed Value
0MB 7808KB
8MB 16000KB
12MB 20096KB
16MB 24192KB
20MB 28288KB
24MB 32384KB
28MB 36480KB
32MB 40576KB


Models 760E/760ED/760EL/760ELD

DIMM Displayed Value
Base Memory 8MB		 Displayed Value
Base Memory 16MB
0MB 7808KB 16000KB
8MB 16000KB 24192KB
16MB 24192KB 32384KB
24MB 32384KB 40576KB
32MB 40576KB 48768KB
40MB 48768KB 56960KB
48MB 56960KB 65152KB
64MB 73344KB 81536KB


Memory errors might stop system operations, show error messages on the screen, or hang the system.
Use the following procedure to isolate memory problems:

NOTE: Make sure that the DIMM adapter card is fully installed into the connector. A loose connection can cause an error.

  1.  Power-off the computer and  remove the  DIMM adapter card  from its slot (if installed).
  2.  Press and hold the F1 key; then power-on the computer.  Hold the F1 key down until the Easy-Setup screen appears.
  3.  Select Test and press Enter.
  4.  Select Memory and press Enter to  run the memory test on base memory. If an error appears, replace the  system board.
  5.  Power-off the computer and reinstall the  DIMM adapter card; then power-on the computer.  Verify the memory size; then test the memory.  If an error appears, replace  the DIMM adapter card.


If memory problems occur intermittently, use the loop option to repeat the test. When the test detects an error, an error log is printed on the printer connected to the parallel port. See 'Error Log' for more information.

Back to  Jump to TOP-of-PAGE

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.