1120 CPU Card and System Board (2625 365X, XD)



1120 CPU Card and System Board


To remove the system board and CPU Card:

 

Step Screw Location (Quantity) Length
1 CPU Card to System Board (1) M2 x 4 mm
2 CPU Card to System Board (2) M2 x 5 mm


NOTE: Make sure you use the correct screws when replacing.
The system board fits exactly in place in the base cover. Align the system board carefully when removing or reinstalling. Do not force it. Be careful not to damage the input jacks on the left side of the computer or the PCMCIA slots on the right side of the computer.
 

To remove the CPU card from the system board:

 

  Be Careful When connecting the CPU card and the system board again, use the procedures exactly as shown in the figures. Make sure that the two CPU card connectors are connected properly. If these connectors are not properly connected, the computer will not work.

Step Screw Location (Quantity) Length
1 System Board (2) M2 x 4 mm
2 System Board (3) M2 x 4 mm
3 System Board (1) M2 x 4 mm


NOTE: Make sure you use the correct screws when replacing.


Back to  Jump to TOP-of-PAGE

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.