1050 Hard Disk Drive (2625 365X, XD)

1050 Hard Disk Drive

  Do not drop or apply any shock to the hard disk drive.
The hard disk drive is sensitive to physical shock. Incorrect handling can cause damage and permanent loss of data on the hard disk. Before removing the hard disk drive, have the user make a backup copy of all the information on the hard disk. Never remove the hard disk drive while the system is operating or is in suspend mode.

  1.  Before removing the hard disk drive, eject the CD-ROM tray  by inserting a pin into the mechanical eject hole on the front of the  CD-ROM drive. Pull the tray out fully. Otherwise, the CD-ROM drive may  be damaged when you remove the hard disk drive.

  2.  Remove the hard disk drive exactly as shown in the figure.  Do not apply any extra force to the hard disk drive when removing it.
  3.  This procedure is the same for Model 365X and Model 365XD.


Back to  Jump to TOP-of-PAGE

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.