FRU Removals and Replacements (2625 365X, XD)

FRU Removals and Replacements

This section contains information about removals and replacements.

The system board is sensitive to, and can
be damaged by, electrostatic discharge. Establish personal grounding
by touching a ground point with one hand before touching these units.
An electrostatic discharge (ESD) strap must be used to establish personal grounding.
Do not damage any parts. Only certified, trained personnel should service the computer.
The arrows in the 'Removals and Replacements' section show the direction of movement to remove a FRU, or to turn a screw to release the FRU. The arrows are marked in numeric order, in square callouts, to show the correct sequence of removal.
When other FRUs must be removed before removing the failing FRU, they are listed at the top of the page.
To replace a FRU, reverse the removal procedure and follow any notes that pertain to replacement. See 'Locations' for internal cable connections and arrangement information.
When replacing a FRU, use the correct screw size as shown in the procedures.

please READ - see

Back to

Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.