1040 Frame (2640-560x

1040 Frame (2640-560x - 60x, 70x)

Frame

Battery Pack

+----+----+-------+ |Step|Qty |Torque | Screw No. +----+----+-------+

1 2 4kgcm -------------------

2 12 4kgcm
NOTE: Make sure you use the correct screw, and tighten it firmly to the torque shown in the table if you have a torque screwdriver.
Never use a screw that you removed. Use a new one. Make sure the screw is tightened firmly.
(see Screw Tightening Information if you do not have a torque screwdriver.)

The LCD release latch is easily disassembled, see the following if you need to reassemble.

NOTE:

Be careful not to remove the Esc key when you remove the frame. If Esc key is removed, replace the key as shown.
When replacing the frame, check wheter the click buttons of the TrackPoint III can be pressed correctly.
(If the frame is not in place, the click buttons will not function.)

Back to

Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.