Checking the Installed Devices List (SelectaDock II)
Checking the Installed Devices List
If a device is installed but the icon appears in a gray shade rather
than a dark shade on the basic diagnostics screen,
the device is defective. Reseat the device connectors.
If the symptom remains, replace the device or the system board.
If needed, adjust the contrast control to clearly
distinguish the shades of the icon.
If a device that is
not installed appears in a dark shade (for example, FDD-2
appears in a dark shade when NO
second FDD is installed), do the following:
- Replace the first
device in the configuration, such as an FDD-1 and an HDD-1.
- If the problem remains, replace the system board of the computer.
The PCMCIA-1, parallel, and serial icons
are always displayed in a dark shade because the
icons represent subsystems of the system board and
not the attachment of the devices.
The FDD-1, the HDD-1, the PCMCIA-1, the CD-ROM-1 or DVD-1 icons represent the first
drive in the system configuration for each type of device.
Similarly, the HDD-3, FDD-2, or
PCMCIA-2 icons represent the second drive, usually attached
through a port replicator or an expansion unit.
The HDD-2 icon represents the hard disk drive in the UltraBay
of the computer.
The HDD-3 or HDD-4 icons represent the hard disk drive in the
SelectaDock Docking System (except the SCSI hard disk).
The FDD-2 or PCMCIA-2 icons represent the FDD or PCMCIA
attached through a port replicator or in the SelectaDock.
Back to 
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.