External Display (3547)



External Display

If the screen is rolling, replace the external display. If the problem is not corrected, replace FRUs in the following order one at a time until the problem is corrected:

NOTE: If the replaced parts did not resolve the problem, put the original parts back in the SelectaDock Docking System. Do not replace non-defective parts.


If the screen is not rolling, do the following to run the display self-test:
  1.  Power-off SelectaDock Docking System and the external display.
  2.  Disconnect the external display signal cable from the SelectaDock Docking System.
  3.  Power-on the external display.
  4.  Turn the contrast control to its maximum position.
  5.  Turn the brightness control to its center position.


Check for the following conditions:


If the external display does not meet these specifications, replace the external display.

If the external display meets these specifications, replace FRUs in the following order one at a time until the problem is corrected.


Back to  Jump to TOP-of-PAGE

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.