FRU Removals and Replacements
This section contains information about removals and replacements.
be damaged by, electrostatic discharge. Establish personal grounding
by touching a ground point with one hand before touching these units.
An electrostatic discharge (ESD) strap must be used to establish
personal grounding.
Before removing any FRU, power-off the computer, unplug all power cords from electrical outlets, remove the battery pack, and then disconnect any interconnecting cables.
The battery pack contains small amounts of nickel.
Do not disassemble it, throw it into fire or water, or
short-circuit it. Dispose of the battery pack as required
by local ordinances or regulations.
Before the computer is powered-on after FRU replacement, make sure all screws, springs, or other small parts, are in place and are not left loose inside the computer. Verify this by shaking the computer and listening for rattling sounds. Metallic parts or metal flakes can cause electrical shorts.
Please see the LEGAL - Trademark notice.
Feel free - send a for any BUG on this page found - Thank you.