Flash Memory (2625)



Flash Memory

BIOS, System setup programs, and diagnostic tests are stored in flash memory.

Flash Memory Update

A flash memory update is required for new versions.

  When Updating Flash Memory
During the flash update do not:

  On certain systems, updating flash memory can reset all customer's configuration settings to the default values. The following steps bypass the CONFIG.SYS and AUTOEXEC.BAT files, so the customer's configuration setting are not reset to the default values.

To update the flash memory 
  1.  Power-off the computer.
  2.  Install the battery pack and connect the AC Adapter.
  3.  Insert the update diskette in drive A.
  4.  Power-on the computer.
  5.  When the message Starting PC DOS appears, press F5  to bypass the CONFIG.SYS and AUTOEXEC.BAT.
  6.  At the prompt, select Country Language  then press Enter.
  7.  Follow the instructions on the screen.


Back to  Jump to TOP-of-PAGE

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.