General Checkout (2625)

•  How to Use the Error Messages
•  How to Diagnose Multiple FRUs
•  Passwords

1.  Obtain the failing symptoms in as much detail as possible.  Pay close attention to the error messages on the screen.
2.  Verify the symptoms by attempting to recreate the failure by  running the diagnostic test or by repeating the same operation.
    To run the diagnostics, refer to How to Run Diagnostics

Symptom	Go to
AC Adapter	Checking the AC Adapter
Audio Card	Audio Card Checkout
Battery Pack	Checking the Battery Pack
Configuration is not the same as the installed devices.	How to Run Diagnostics
Diskette Drive	Diskette Drive Checkout
Keyboard/Auxiliary Device (Mouse/Pointing Device)	Keyboard/Aux. Input Device Checkout
Memory related problems	Memory Checkout
Operational Charging	Checking Operational Charging
Other symptoms. (Such as LCD problems.)	Symptom-to-FRU Index, and then use Other Symptoms tables.
Port Replicator	Port Replicator Power Overload
POST does not complete. No beeps/error code are indicated.	Symptom-to-FRU Index, and then use the No Beep Symptoms table.
POST beeps, but no error codes are displayed.	Symptom-to-FRU Index, and then use the Beep Symptoms table.
POST detected an error and displayed numeric error codes.	Symptom-to-FRU Index, and then use the Error Message table.
Power failure. (The power indicator does not go on or stay on.) (The power indicator does not go on or stay on.)	Power Systems Checkout
Symptoms cannot be recreated. (Intermittent problems.)	Use the customer reported symptoms and go to Symptom-to-FRU Index
TrackPoint III will not work	TrackPoint III Checkout