Beep Symptoms (2625)



Beep Symptoms

Beeps symptoms are short tones or a series of short tones separated by pauses (intervals without sound). See the following examples.
Beep Symptom    FRU/Action
1-1-3 1. Run Setup
   CMOS write/read test 2. System Board
   in progress or failure.  
1-1-4 1. System Board
   ROM BIOS check error.  
1-2-1 1. System Board
   Programmable interval  
   timer 0 test in progress  
   or failure.  
1-2-2 1. System Board
   DMA channel 0 address and  
   count register test in  
   progress or failure.  
1-2-3 1. System Board
   DMA page register write/read  
   in progress or failure.  
1-3-1 1. System Board
   RAM refresh verification  
   test in progress or failure.  
1-3-3 1. RAM Memory Board
   First 64K RAM chip or 2. System Board
   data line failure, multi-bit.  
1-4-2 1. System Board
   Parity failure first 64K RAM.  
1-4-3 1. System Board
   Fail-safe timer failure  
   (only used by EISA BIOS).  
1-4-4 1. System Board
   Software NMI port failure  
   (only used by EISA BIOS).  
2-1-1, 2-1-2, 2-1-3 1. RAM Memory Board
   2-1-4, 2-2-1, 2-2-2 2. System Board
   2-2-3, 2-2-4, 2-3-1  
   2-3-2, 2-3-4, 2-4-1  
   2-4-2, 2-4-3, 2-4-4  
   First 64K RAM chip or data  
   line failure on bit .  
3-1-2 1. System Board
   Master DMA register test  
   in progress or failure.  
3-1-3 1. System Board
   Master interrupt mask  
   register test in progress  
   or failure.  
3-1-4 1. System Board
   Slave interrupt mask register  
   test in progress or failure.  
3-2-4 1. System Board
   Keyboard controller test 2. Keyboard
   in progress or failure. 3. Keyboard Card
3-3-1 1. System Board
   Slave DMA register test  
   in progress or failure.  
3-3-4 1. System Board
   Screen memory test  
   in progress or failure.  
3-4-1 1. System Board
   Screen initialization in progress.  
3-4-2 1. System Board
   Screen retrace test  
   in progress.  
4-2-1 1. System Board
   Timer-tick interrupt test  
   in progress or failure.  
4-2-2 1. System Board
   Shutdown test in progress 2. Processor Card
   or failure.  
4-2-3 1. System Board
   Gate A20 failure.  
4-2-4 1. System Board
   Unexpected interrupt 2. Processor Card
   in protected mode.  
4-3-1 1. RAM Memory Board
   RAM test of memory above 2. SO DIMM
   64K in progress or failure. 3. System Board
4-3-2 1. System Board
   Programmable interval  
   timer channel 2 test  
   in progress or failure.  
4-3-4 1. System Board
   Real-time clock test  
   in progress or failure.  
4-4-1 1. System Board
   Serial port test  
   in progress or failure.  
4-4-2 1. System Board
   Parallel port test  
   in progress or failure.  
4-4-3 1. Processor Card
   Math coprocessor test 2. System Board
   in progress or failure.  


Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.