1180 Processor Card



1180 Processor Card

 

Turn the system board upside down. Then remove any metal tape holding the card.
 

To remove the processor card, gently lift the area shown by A straight up. Do not pull the other areas.
 

NOTE: If the processor card is not installed correctly, the computer may not turn on. Reinstall the card in this case.

Use the following table for reference when replacing parts.

Step Location (Quantity) Length
1 Processor card assembly 14 mm


NOTE: Make sure you use the correct screw. Screw Size Chart

Back to  Jump to TOP-of-PAGE

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.