System Programs in Flash Memory

System Programs in Flash Memory

System setup programs and diagnostic tests are stored in Flash memory.

Flash Memory Update

A flash memory update is required for the following conditions:

When Updating Flash Memory

Do not power-off the computer, disconnect the Vac power, or remove the battery during the Flash update. The system board will have to be replaced if the update is interrupted.

Updating Flash memory also resets all of the customer‘s configuration settings to the default values.

To update the Flash memory, perform the following steps:
  1.  Get the appropriate diskette which contains the update.
  2.  Insert the System Program Service Diskette  into drive A and power-on the computer.
  3.  Select Update system programs from the menu.

Back to  Jump to TOP-of-PAGE

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.