NOTE: To run the diagnostics, refer to 'How to Run the Diagnostics'
Please see the LEGAL - Trademark notice.
Symptom
Go to
Power failure. (The power indicator does not go on or stay on.)
'Power Systems Checkout'
POST does not complete. No beeps or error codes are indicated.
'Symptom-to-FRU Index', and then use the
No Beep Symptoms table.
POST beeps, but no error codes are displayed.
'Symptom-to-FRU Index', and then use the Beep Symptoms
table.
POST detected an error and displayed numeric error codes.
'Symptom-to-FRU Index', and then use the
Numeric Error Codes table.
The diagnostic test detected an error and displayed an FRU code.
'FRU Codes'
The configuration is not the same as the installed devices.
'Checking the Installed Devices List'
Other symptoms (such as LCD display problems).
'Symptom-to-FRU Index', and then use the other
symptom table.
table.
Symptoms cannot be recreated. (Intermittent problems.)
Use the customer reported symptoms and go to 'Symptom-to-FRU Index'.
Back to
Feel free - send a for any BUG on this page found - Thank you.