TrackPoint II Checkout

TrackPoint II Checkout

If the TrackPoint II will not work, check the configuration in Easy-Setup by selecting Keyboard from the Config menu.
If the configuration of the TrackPoint II disabled, select TrackPoint to enable it.
If this does not correct the TrackPoint II problem, continue with the following.

The TrackPoint II does automatic compensations to adjust the pointer sensor. During this process, the pointer moves on the screen automatically for a short time. This self-acting pointer movement can occur when a slight, steady pressure is applied to the TrackPoint II pointer while the computer is powered on or while the system is running, or re-adjustment is required because the temperature has exceeded its normal temperature range. This symptom does not indicate a hardware problem. No service actions are necessary if the pointer movement stops in a short period of time.

If a click button problem or pointing stick problem occurs, do the following:

1.  Go to Easy-Setup screen.
2.  Select an item with the pointing stick.
3.  Press either the left or right click button.
4.  Verify that both buttons work correctly.

•  Reseat the three keyboard cables.
•  Replace the keyboard.
•  Replace the interposer card.
•  Replace the system board.

Please see the LEGAL  -  Trademark notice.
Feel free - send a   for any BUG on this page found - Thank you.