Symptom-to-FRU Index 701C, 701CS (2630)

Symptom-to-FRU Index 701C, 701CS (2630)

  Numeric Error Codes

The Symptom-to-FRU Index contains tables that list causes of symptoms. The most likely cause is listed first. Use this index to help you decide which FRUs to have available when servicing a computer.

  please READ - see

Before removing any FRU, power-off the computer, unplug all power cords from electrical outlets, remove the battery pack, then disconnect any interconnecting cables.

Perform the FRU replacement or actions in the sequence shown in the FRU / Action columns. If the replacement FRU did not solve the problem, put the original FRU back in the computer.

  1.  Before replacing the top and bottom system boards,  try reseating the boards.  If reseating the boards does not  correct the problem,  replace the boards.
  2.  If possible,  install the latest level of BIOS available  before replacing any FRU.

Before completely reassembling a computer that has been repaired, try to reboot the computer to check the repairs that have been completed. However, when you reboot without the keyboard attached, the computer will display error codes 8603, 8613, and 86XX.

Use displayed numeric error codes to determine the system problem. If numeric error codes are not available, use the other symptom tables that describe specific symptoms. If the symptom is not listed, go to 'Undetermined Problems'

NOTE: For IBM devices not supported by diagnostics codes of ThinkPad 701C / 701CS, see the manual for those devices.

Back to  Jump to TOP-of-PAGE

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.