Checking the Car Battery Adapter (700 only)



Checking the Car Battery Adapter (700 only)

If the output voltage from the cigarette lighter socket of the car is less than 10.5 Vdc, the power-on indicator on the car battery adapter blinks and a noise can be heard continuously.
  1.  Unplug the car battery adapter cable from the connector, if  connected.
  2.  Plug the car battery adapter into the cigarette lighter socket.

    NOTE: If the adapter is already plugged in, be sure to unplug the  adapter from the cigarette lighter socket, then plug it into  the socket again.

  3.  Measure the output voltage of the car battery adapter cable.

     

    Pin Voltage (Vdc)
    1 +19.0 to +21.0
    2 Ground

     



NOTE: If the output voltage from the cigarette lighter socket of the car is less than 10.5 Vdc, the power-on indicator on the car battery adapter blinks and a continuous noise can be heard. Have the car battery serviced.


Back to  Jump to TOP-of-PAGE

Please see the LEGAL  -  Trademark notice.
Feel free - send a Email-NOTE  for any BUG on this page found - Thank you.