+---+
|001|
+---+
- Remove all IC DRAM cards from their slots (if installed).
- Power-off the computer, then power it on.
After the cursor moves to the upper right corner of the screen,
press Ctrl+Alt+Insert
to start the system program.
- Press Ctrl+A at the Main Menu.
DID THE ADVANCED DIAGNOSTIC MENU APPEAR?
+---+
Yes No-+002|
| +---+
| Replace the base memory card.
| If the problem is not corrected,
+-+-+ go to 'Undetermined Problem'.
|003|
+---+
- Run the memory tests.
Use the RUN TESTS ONE TIME option.
DID THE MEMORY TESTS END WITHOUT AN ERROR?
+---+
Yes No-+004|
| +---+
+-+-+ Replace the base memory card.
|005|
+---+
Install the IC DRAM card into slot 1 and run
Automatic configuration.
- Run the memory test.
Use the RUN TESTS ONE TIME option.
DID THE MEMORY TESTS END WITHOUT AN ERROR?
+---+
Yes No-+006|
| +---+
| Replace the IC DRAM card in slot 1.
| If the problem is not corrected,
+-+-+ replace the system board.
|007|
+---+
- Install the IC DRAM card into slot 2 and run
Automatic configuration.
- Run the memory test.
Use the RUN TESTS ONE TIME option.
DID THE MEMORY TESTS END WITHOUT AN ERROR?
+---+
Yes No-+008|
| +---+
| Replace the IC DRAM card in slot 2.
| If the problem is not corrected,
+-+-+ replace the system board.
|009|
+---+
If the problem occurs intermittently,
run the memory tests multiple times to create an error log.
Please see the LEGAL - Trademark notice.
Feel free - send a 
for any BUG on this page found - Thank you.